10g/h Ozone Generator with Ozone Power Supply Power Cord and Fan

FEATURES

1. High-voltage and high-frequency corona discharge, small size transformer, low consumption rate of electricity.
2. Epoxy potting, Damp proof, Waterproof, Corrosion proof transformer.
3. Easy installation and maintenance.
4.Long-life ceramic plates are made through green production on 96% aluminum oxide ceramics, with silk-screen discharge resistance of tungsten and molybdenum and other agents, flattened and tin-treated on electrodes after co-firing to high temperature 1650 ℃.High temperature co-firing electrodes and circuit its never fall off, and are with excellent moisture and oxidation resistance.

TECHNICAL PARAMETER

TEST CONDITIONS:

1. Feed Gas: Dry air or oxygen source recommendated
2. Ambient temperature: ≤10℃, Humidity: <10% (Different temperature and humidity in the environment will affect the ozone output and concentration.)

APPLICATION

ATTENTION must be paid to the following:

1,Cooling method: Air cooling for transformer and ceramic plate.
2,When ozone generators work, it is necessary to have cooling fans to blow the ceramic plates and ozone power supplies. When installing the power supply, please make sure there is 2-3cm high space between its bottom and the fixed board, so that heat on the bottom of the power supply can be radiated quickly.
3,This is a high voltage product. Do not touch it when it is working.
4,Usually after ozone sterilization, it needs 20-30 minutes to diffuse ozone before anyone enters. And only when the ozone concentration is or below 0.15ppm, it is permitted to enter.
5,The ozone output test data is based on 95% pure oxygen feeding and dew point -45°. Different temperature and humidity in the environment will affect the ozone output and concentration.
6,This item can work continuously for 20~30 minutes with air cooling. If it continues to work without any rest, the ozone output will decrease by degrees because ceramic plates are overheated.
7, When two high voltage wires are very close to each other, especially under moist circumstances or they touch, the wires will make a light and possibly lead that the insulation becomes discoloured even melts. The way to avoid this matter is to keep the two high voltage wires parallel or separate, at least untouched.
8,Usually when ozone generator is used for test, it will be better if the interval time between two tests is one minute. It is because the output voltage and start-up electric current is very very high, if it is started up and closed down frequently within several minutes, power supply is possible to be burned due to instant or instantaneous high current.
9,Deoxidized materials or objects should not be contacted with ozone for a long time.

    Shaanxi Kairui Hongxing Electronic Co., Ltd. is a professional manufacturer of industrial ceramic heating element. Since 2007, Kairui focused on the development and production of various types of ceramic igniter and ozone generator application components. To learn more about the product information, please refer to the doucuments: 

®Ceramic Heating Element

The Regional Office

Our products include: Ceramic igniter, Ceramic heating plate, Ceramic heating tube for water , MCH ceramic heating element, ozone plate, ceramic ozone plate, ozone generator, ozone disinfection machine, ozone machine accessories longevity ceramic ozone plate, High pressure glass glaze resistor, high voltage Intelligent divider, voltage dividing resistors and other ceramic electronic components. More than 20 series, 300 types. Personalized products and services to provide customers with a significant advantage. Due to the high quality of our products and reliable performance, they are widely used in industrial pellet stove, food factories, hospital disinfection, air treatment, household sterilization and other related fields.

Production Line

  We have many years of history in the ceramic heating industry. All our products have met the standards and certification of ROHS, CE, UL, etc. The glass glaze high voltage resistors developed and produced by our company have obtained several national utility model patents and design patents. As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching Europe.

  Kairui Hongxing gain the satisfaction and trust of the customer by drawing on unique technology and skills. We take customer’s point of view all the time and constantly improving customer satisfaction, responsiveness and the ability to take prompt and effective action. Kairui put the quality management system (ISO 9001) to effective use and constantly improve the quality of products and services.

  If you are interested of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future. always works together with the partners and investors to create a better future!